How can i take apart the ignition in my 94 topaz?
Mar 27, 2011 at 3:23 PM
94 Topaz
TANAMARIEE123
- MEMBER
- 1 POST
REMOVAL
Disarm airbag system, if equipped.
Disconnect battery ground cable, then remove five steering column shroud attaching screws.
Disconnect battery ground cable, then remove five steering column shroud attaching screws.
Remove two bolts and two nuts attaching steering column to column bracket, then lower steering column assembly to seat and remove column shrouds.
Disconnect ignition switch wire connector, then rotate ignition switch lock cylinder to the RUN position.
Remove the two retaining screws connecting the switch to the lock cylinder housing.
Detach ignition switch from actuator pin, then remove switch.
Disarm airbag system, if equipped.
Disconnect battery ground cable, then remove five steering column shroud attaching screws.
Disconnect battery ground cable, then remove five steering column shroud attaching screws.
Remove two bolts and two nuts attaching steering column to column bracket, then lower steering column assembly to seat and remove column shrouds.
Disconnect ignition switch wire connector, then rotate ignition switch lock cylinder to the RUN position.
Remove the two retaining screws connecting the switch to the lock cylinder housing.
Detach ignition switch from actuator pin, then remove switch.
Mar 27, 2011 at 3:33 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.