interior door handle spring

1994 MERCURY SABLE
FWD
Avatar
FINFAN881
  • MEMBER
  • 2 POSTS
how do you replace the interior door handle spring on a 1994 mercury sable. is it difficult?
Feb 14, 2011 at 6:57 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,240 POSTS
Usually, the part is replaced rather than repaired. Is the spring broken?
Apr 13, 2011 at 5:19 AM
Avatar
FINFAN881
  • MEMBER
  • 2 POSTS
The problem was the fact that the handle was held in with a rivet type fastener. I decided to knock out the fastener replaced the spring. Then I replaced the fastener with a a sort of tension spring. it worked perfectly.
Apr 13, 2011 at 5:52 AM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,240 POSTS
That sounds like a good idea. The rivit thing is somewhat new. Screws were used in the past. The rivits must be cheaper and easier to do.
Apr 13, 2011 at 6:25 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.