Every thing is together but won't crank

Tiny
SHADOWHUNTERXNZ
  • MEMBER
  • 1994 MAZDA 626
  • 2.5L
  • V6
  • FWD
  • MANUAL
Rebuilt engine every thing is together but won't crank over the fan lights on dash are lit up then when you turn key to start the lights go out and there is no sound from starter only from fuses and relays. The starter motor has power to it but the ignition line to it when ignition is. On only puts out. We can jump the terminals on starter to get power through to the ignition wire and the starter cranks over so starter is fine but vehicle won't fire up at all is getting spark to plugs and fuel and timing is set right in the manual book.
Friday, February 27th, 2015 AT 9:07 PM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Is vehicle equipped with anti-theft system? With ignition turned to crank position, the Black/Yellow wire should have battery voltage. It leads to the clutch switch which outputs as Black/Blue wire and goes to the starter motor.
Was this
answer
helpful?
Yes
No
Saturday, February 28th, 2015 AT 2:40 AM

Please login or register to post a reply.

Sponsored links