1994 mazda 626 lx 2.0

1994 MAZDA 626
4 CYL • 2WD • AUTOMATIC
Avatar
K.JOHNSON63
  • MEMBER
  • 1 POST
i have a 1994 mazda 626 lx 2.0 that is getting no fire/current at distributor plug when turning the key in all positions. Have replaced all fuses and relays in fuse box to no avail. Can anyone tell me if there is a fuse/relay to check or test or could it be the electrical part of the ignition switch that is causing me all the problem. Your help would be greatly appreciated!!!
Dec 6, 2010 at 1:26 AM
Advertisement
Avatar
KHLOW2008
  • ✓ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
Ignition coil receives its power supply direct from the ignition switch. At ignitio switch test the Black/White wire for battery voltage when ignition is turned ON and while cranking. If battery voltage is not available, the ignition switch is faulty. If voltage is available but not getting to the ignition coil, there is an open in the circuit.
Dec 7, 2010 at 5:52 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.