code 332

1994 LINCOLN MARK VIII
152,000 MILES • V8 • 2WD • AUTOMATIC
Avatar
JAKKE
  • MEMBER
  • 1 POST
1994 lincoln mark 8. has a 332 code that keeps coming back. everything seems to be functioning properly evr soloniod , egr valve, etc. replaced the dpfe sensor.
Aug 16, 2011 at 10:07 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
WRENCHTECH
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 20,761 POSTS
That code is for insufficient flow. There are basically 2 things that cause that on a Ford. One is the DPFE sensor which you have already replaced and the other is the passage through the intake gets plugged up with carbon. You can find this out by applying vacuum to the EGR at idle. If the engine doesn't try to stall, the passage is plugged. Sometimes yoy have to remove the throttle body to find the passage but it's in there somewhere.
Aug 16, 2011 at 10:44 PM
Advertisement