Avatar
REDBONE
  • MEMBER
  • 105 POSTS
when starting my jeep it runs for about 15 seconds then stops running,fuel pump is working.
Oct 1, 2012 at 9:51 AM
Advertisement
Avatar
DRCRANKNWRENCH
  • ✓Experienced Mechanic
  • 3,380 POSTS
There are many reasons that you might be stalling out. One things to look at, I am including a diagnostic walk through for your situation and it wil get into this, it obstrucitons in the intake and exhaust. Vehicles with your mileage acan often have a catalytic converter fail internally and collapse in on itself and clog the exhaust. Another common issue is fuel preussure problems. To quick check, this does not mean it is not in need of replacement, the converter whack it with your hand or a rubber amllet and listen for loose material.
Use the link below for the diagnostic;

https://www.2carpros.com/articles/engine-stalls
Oct 1, 2012 at 10:05 AM
Avatar
MARTY1994
  • MEMBER
  • 1 POST
Hey redbone, I believe I might have the answer (Info) for you. DrCranknWrench gave you an excellant link, tho didn't see(might've missed) any mention of the "CRANK(SHAFT) POSITION SENSOR"!
Had the same problem on my 1994 Jeep Cherokee (4.0/6cyn) and after all the researching, found the answer.
The best price for the part was at partsgeek.com @ $29.10+$7.95 shipping & handling($37.05). Whereas autopart stores had it for almost twice the amount. Its been several months since I took the part to a mcnik (Hands to big/no real time) & had it changed. Since that & a full tune up, have'nt had a single problem with it.
Hopefully this will help you out, if nothing else give you a starting point where I had none - "GOOD LUCK"!!!!! (PHOTO ENCLUDED)
Oct 10, 2012 at 8:47 AM
Avatar
DRCRANKNWRENCH
  • ✓Experienced Mechanic
  • 3,380 POSTS
I thought the walk through did have both mention of crankshaft and camshaft position sensors. Thanks for pointing that out Marty, I will look into that. Yes, especially the crankshaft sensor should be suspect. Your truck is an OBD 1 so it can be scanned for codes, but not always easily. Try to get Advance or Auto zone to pull trouble codes and the crankshaft sensor should come up if faulty. If it does not come up it does not mean it is not failing intermitantly though. You should price on out at www.roackauto.com. You would not believe how cheap this place is despite selling well known name brands. They are a closeout only dealer and their stock changes rapidly so it is worth check ing everyday. I got a near $200.00 wiper motor for $40.00. I could have gotten an even cheaper one but I wanted the one made by Cardone as I was more fmailiar with the re-manufacturer. They sell new parts to as a position sensor will be new.
Oct 10, 2012 at 2:15 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement