1994 Hyundai Lantra my hyundia lantra

1994 HYUNDAI LANTRA
Avatar
MATHEWCRAIGE
  • MEMBER
  • 4 POSTS
hey guys i have a hyundai lantra 1994 modle j1 1.8
ok i have had this car siting in the shed now for a wile.
i have mucked around with it to get to the water pump and changed that all of a sudden it isnt starting or evin cracking over i really wanna find out whats the go i evin went to the wreckors and got a secend hand one and its doing the same...click click click.. and drains the battrey but i fixed that had no alternator strap but i replaced that and tryed to jump start it with my mates car i am verey on the low with money and trying to find a fast way to fix it with out a lot of $$$$ can u help me PLEASEEEEEE
Aug 8, 2013 at 5:43 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
First of all you need to manually crank the engine to see if it is seized.

Next apply battery voltage to the starter solenoid to test if the starter is good.
Aug 9, 2013 at 12:19 AM
Avatar
MATHEWCRAIGE
  • MEMBER
  • 4 POSTS
Hey sorry to sound stupid but what wood I have to do without taking all the motor out ?
Aug 9, 2013 at 6:26 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
The crank pulley has a bolt that you can turn with a socket.
Aug 9, 2013 at 8:31 AM
Avatar
MATHEWCRAIGE
  • MEMBER
  • 4 POSTS
i have found number 5 there was a ground bolt what wasent screwd in as well and the 5 its pointing at looks really old were all the plastic is just rubing off were it is really old do i need to replace that asap ?
Aug 9, 2013 at 8:46 PM
Avatar
MATHEWCRAIGE
  • MEMBER
  • 4 POSTS
ohh and the plugs to the switches have grease in them is that bad ?
Aug 9, 2013 at 8:47 PM
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Sorry the pictures do not turn up anything when I click on them to enlarge. Bad ground circuits can cause non cranking and electrical connectors have di-electric grease in them to keep away moisture.
Aug 10, 2013 at 3:46 AM