Starter

1994 HYUNDAI EXCEL

MOBILE

MEMBER
1 POST
FOLLOW

Hi,

I have a 1994 Hyundai Excel, and am trying to replace the starter but it's a bugger to get to. I need to know what I need to take out in order to get to it. I can see it but cannot get to it, it seems to me that I may need to take the aircon unit out.

Would appreciate your help.

Kind Regards,

Alma.

Mar 3, 2012 at 11:11 AM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.

HMAC300

AUTOMOTIVE REPAIR CONTRIBUTOR
48,601 POSTS

Removal & Installation

Disconnect negative battery cable. Remove EGR valve (if equipped). Remove speedometer cable. Disconnect starter wires and remove starter mounting bolts. To install, reverse removal procedure. Tighten starter
mounting bolts to 19 24 ft. lbs. (26 33 N.m). Tighten EGR valve mounting bolts to 7 11 ft. lbs. (10 15 N.m). See Fig. 5 .

Mar 3, 2012 at 2:58 PM

RASMATAZ

AUTOMOTIVE REPAIR CONTRIBUTOR
75,992 POSTS

REMOVAL & INSTALLATION
STARTER
Removal & Installation
Disconnect negative battery cable. Remove EGR valve (if equipped). Remove speedometer cable. Disconnect starter wires and remove starter mounting bolts. To install, reverse removal procedure. Tighten starter mounting bolts to 19-24 ft. lbs. (26-33 N.m). Tighten EGR valve mounting bolts to 7-11 ft. lbs. (10-15 N.m).

Mar 3, 2012 at 2:59 PM