how to install a new speedometer guage
Oct 23, 2012 at 12:45 PM
1994 Honda Accord Install New Speedometer Guage
ANONYMOUS
- MEMBER
- 1 POST
Removal & Installation
1. Remove front console panel. Remove Glove Box. See Fig. 7 . Remove stereo radio/cassette player.
2. Remove these switches and disconnect the connectors:
Cruise control master switch/moonroof switch
Panel brightness controller
Rear window defogger switch
See Fig. 8 .
3. Remove the heater air vent, and disconnect the air mix control cable. See Fig. 9 .
4. Lower the steering column and remove instrument panel screws. Carefully pull out the instrument cluster. See Fig. 10 .
5. Disconnect the heater control panel connectors. See Fig. 11 . Remove the heater control panel. See Fig. 12 .
6. If necessary, disassemble the center air vent and side air vent (driver's). See Fig. 13 . To install, reverse removal procedure.
1. Remove front console panel. Remove Glove Box. See Fig. 7 . Remove stereo radio/cassette player.
2. Remove these switches and disconnect the connectors:
Cruise control master switch/moonroof switch
Panel brightness controller
Rear window defogger switch
See Fig. 8 .
3. Remove the heater air vent, and disconnect the air mix control cable. See Fig. 9 .
4. Lower the steering column and remove instrument panel screws. Carefully pull out the instrument cluster. See Fig. 10 .
5. Disconnect the heater control panel connectors. See Fig. 11 . Remove the heater control panel. See Fig. 12 .
6. If necessary, disassemble the center air vent and side air vent (driver's). See Fig. 13 . To install, reverse removal procedure.
Images (Click to enlarge)
Oct 25, 2012 at 10:50 AM
More diagrams.
Images (Click to enlarge)
Oct 25, 2012 at 10:52 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.