I want to replace the rotor and I heard that you need special tools

1994 FORD F-350

130,000 MILES • 5.8L • V8 • 4WD • AUTOMATIC

KSIEDLECKI1

MEMBER
1 POST
FOLLOW

I know how to remove front caliper and pads. I want to replace the rotor and I heard that you need special tools to remove the hub since I have a manual locking hub. What's the process and what tools do I need to complete the process. I heard I needed a spanner socket is there a certain tourque spec for that?

Feb 27, 2015 at 11:03 PM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.

HMAC300

CAR REPAIR CONTRIBUTOR
48,601 POSTS

for torque move rotor back and forth and tighten to 70 ft lbs then back off 1/4 turn then retighten to 15-20 ft lbs. see pics for other instructions tool shold be available at auto parts maybe for rental

Images (Click to enlarge)

Feb 11, 2021 at 9:57 AM