how to to replace switch
May 3, 2012 at 7:22 PM
how to change multifonctionswitch
MIKE3D
- MEMBER
- 5 POSTS
Advertisement
NOTE: On models with tilt column, unscrew the tilt lever and remove.
REMOVAL AND INSTALLATION
Remove steering column shroud.
Remove switch to steering column tube casting attaching screws, then disengage switch from column.
Disconnect switch electrical connectors.
NOTE: Do not damage PRNDL cable.
Remove switch assembly.
Reverse procedure to install. torque switch attaching screws to 18-27 inch lbs .
Roy
REMOVAL AND INSTALLATION
Remove steering column shroud.
Remove switch to steering column tube casting attaching screws, then disengage switch from column.
Disconnect switch electrical connectors.
NOTE: Do not damage PRNDL cable.
Remove switch assembly.
Reverse procedure to install. torque switch attaching screws to 18-27 inch lbs .
Roy
May 3, 2012 at 7:24 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.