Ford Aerostar 94 stalled while driving won't start no spark

220,000 MILES
Avatar
AEROSTARXL
  • MEMBER
  • 18 POSTS
I was driving one day and my 1994 ford Aerostar 3.0 v6 suddenly lost all power and would NOT start after.. Took a spark plug out checked spark, no spark. Then I go to the coil and take the plug off the distributer with other end of plug wire still connected to the coil, I stuck a bolt in and again checked spark and there is none is the coil bad? Could it be a crank sensor? what next step should I do to get closer to understanding what is wrong
May 28, 2012 at 6:24 PM
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
could be a module, pick up coil or a coil. this is assuming that the distributor is turning. get a shop to at least verify the failure for you.

Roy
May 28, 2012 at 6:30 PM
Avatar
AEROSTARXL
  • MEMBER
  • 18 POSTS
Ignition module? And I would take it in but I'm real strapped for cash. But in your opinion you would believe it is the ign module , pick up coil / coil
May 28, 2012 at 6:36 PM
Avatar
AEROSTARXL
  • MEMBER
  • 18 POSTS

Distributer is turning
May 28, 2012 at 6:39 PM
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
ford recommended replacing the module, pick up and coil as an assembly for this failure back in the day.

Roy
May 28, 2012 at 6:59 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle