Ford Aerostar 94 stalled while driving won't start no spark

Tiny
AEROSTARXL
  • MEMBER
  • 1994 FORD FIVE HUNDRED
  • 220,000 MILES
I was driving one day and my 1994 ford Aerostar 3.0 v6 suddenly lost all power and would NOT start after. Took a spark plug out checked spark, no spark. Then I go to the coil and take the plug off the distributer with other end of plug wire still connected to the coil, I stuck a bolt in and again checked spark and there is none is the coil bad? Could it be a crank sensor? What next step should I do to get closer to understanding what is wrong
Tuesday, May 29th, 2012 AT 1:24 AM

4 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Could be a module, pick up coil or a coil. This is assuming that the distributor is turning. Get a shop to at least verify the failure for you.

Roy
Was this
answer
helpful?
Yes
No
Tuesday, May 29th, 2012 AT 1:30 AM
Tiny
AEROSTARXL
  • MEMBER
  • 18 POSTS
Ignition module? And I would take it in but I'm real strapped for cash. But in your opinion you would believe it is the ign module, pick up coil / coil
Was this
answer
helpful?
Yes
No
Tuesday, May 29th, 2012 AT 1:36 AM
Tiny
AEROSTARXL
  • MEMBER
  • 18 POSTS
Distributer is turning
Was this
answer
helpful?
Yes
No
Tuesday, May 29th, 2012 AT 1:39 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Ford recommended replacing the module, pick up and coil as an assembly for this failure back in the day.

Roy
Was this
answer
helpful?
Yes
No
Tuesday, May 29th, 2012 AT 1:59 AM

Please login or register to post a reply.

Sponsored links