car

1994 CHRYSLER SUNDANCE
4 CYL • FWD • AUTOMATIC
Avatar
FANTASTICFOUR26
  • MEMBER
  • 1 POST
i gave my car a tune up but when i drive the car it runs fine until i press on the brakes an stop then it shakes what could be the problem
Jun 28, 2011 at 10:23 PM
Advertisement
Avatar
MHPAUTOS
  • ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
Check that the booster has not developed a vacuum leak, test by undoing the booster vacuum line and blocking, apply brakes, if shake is gone replace booster, (do not do this as a drive test, with the booster disconnected you will have very heavy and poor preforming brakes)
Jun 28, 2011 at 10:38 PM
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
Hi guys. I think there might be some confusion here. WHAT shakes, the engine or the brake pedal / whole car? Does the shaking occur when the car is standing still or just when you're stopping the car?
Jun 28, 2011 at 10:58 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.