I have seen this happen when people use high pressure washers to clean their engine.
Water will get into electronics, the intake, and from there to the combustion chamber.
Your best bet, since it is almost running, is to go and buy some, "DRY GAS" at your local parts store. It eats up and eliminates water. Since the engine almost ran your electronics are probably fine. I have seen this happen and the vehicle will start the next day since the water dries off.
The one things that you might check is under the distributor cap, ( I think you have one. The 1994 were a cutoff years when solid state ignitions came out).
I will keep an eye on this post and if you need further assistance.
SPONSORED LINKS
Thursday, September 3rd, 2020 AT 12:47 PM