What's the problem when coming to a complete.

Tiny
ANONYMOUS
  • MEMBER
  • 1994 BUICK PARK AVENUE
  • 1,700 MILES
What's the problem when coming to a complete stop the car quits or when making a sharp turn it quits
Tuesday, February 12th, 2013 AT 7:51 PM

1 Reply

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
First eliminate all vacuum or air leaks in the system. You may have a bad IAC ( idle air control) but try cleaning the throttle body first. Remove the intake snorkel, have someone hold the throttle wide open for you and scrub the back side of the throttle plate and surrounding bore with an old tooth brush and some carb cleaner. Be sure to spray some into the small holes next to the throttle plate. That should help stabilize the idle. If it still has a problem, replace the IAC.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2013 AT 7:58 PM

Please login or register to post a reply.

Related Engine Stall While Driving Content

Is it Safe to Drive Check Engine Light?
VIDEO
Is it Safe to Drive Check Engine Light?
Instructional repair video
Engine Stalls While Driving
GUIDE
Engine Stalls While Driving
An engine that stalls while driving and then starts back up again, either immediately or after a short time is different from an engine that just wont start or if the...
VIEW MORE

Sponsored links