Wont go in gears.only reverse
Jan 12, 2012 at 8:45 PM
Transmission problems 94 325i
1994 BMW 325I
JAMES MCCLEAN
- MEMBER
- 1 POST
Advertisement
RIVERMIKERAT
- ✓ASE Certified Mechanic
- 6,110 POSTS
Check fluid pressure. Check fluid level and condition. If fluid pressure is low, you'll need a front pump. Bring level to within specs. If fluid has brownish tinge or smells bad (you'll know) have it flushed.
If all this is fine, pour about a tablespoon or two of brake fluid in and run it for awhile. Then see if that makes any changes. If so, it'll work for a couple thousand miles. If not (or if so), you'll need to have it rebuilt, unless the linkage is misadjusted.
If all this is fine, pour about a tablespoon or two of brake fluid in and run it for awhile. Then see if that makes any changes. If so, it'll work for a couple thousand miles. If not (or if so), you'll need to have it rebuilt, unless the linkage is misadjusted.
Jan 13, 2012 at 12:47 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.