1994 Acura Integra Car Will Start Spark Now Replaced Distributor Also

1994 ACURA INTEGRA
200,000 MILES
Avatar
RRRRR1234
  • MEMBER
  • 1 POST
My car will not start up , i have spark now , i replaced the distributor, also i refurbished my starter, Got new spark plugs, and wires, changed oil, fuel pump replaced, also i replaced my main relay switch and fuel filter....
it almost sounds like this is not compression , I am stumped ... now when i try to start it all i here is it rumbling on a couple of occasions but does not fully start up but i here it wanting to fire :'( please help me

my fuses are good and relays are working, I just don't know what to do please help me ..
Much appreciated , Ricardo Teves
Oct 18, 2012 at 1:58 AM
Advertisement
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Could be the timing is off or the T/Belt is broken or worned out-Check the condition of the belt-start here-Further check the fuel pressure if its within specs with a gauge and then comeback I'll be waiting if you need more help-
Oct 18, 2012 at 2:08 AM
Avatar
KHLOW2008
  • ✓ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
Are the firing order correct?
Oct 18, 2012 at 1:10 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.