SPONSORED LINKS

Flywheel Access 1993 Camry

Tiny
JOHN A YOUNG
  • MEMBER
  • 1993 TOYOTA CAMRY
  • 4 CYL
  • FWD
  • 356,000 MILES
Cant locate the flywheel/driveplate cover on my 1993 toyota camry 2.2L automatic transaxle. Without access to to the ring gear teeth I cant pull the crank pulley to change the timing belt.
My Haynes manual is once again failing me.
Thank you
SPONSORED LINKS
Sunday, November 28th, 2010 AT 9:48 PM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
The flywheel drive plate cover is at bottom of trans, between the oil sump and trans.

An air impact wrench would be the easiest way to remove and install the drive pulley bolt.
Was this
answer
helpful?
Yes
No
Sunday, December 5th, 2010 AT 5:51 AM

Please login or register to post a reply.

Related Flywheel Replace/Remove Content

Flywheel Replacement
GUIDE
Flywheel Replacement
An engine flywheel is used to couple the engine to the transmission while holding the clutch assembly. When replacing a flywheel the transmission and clutch must be removed...
VIEW MORE

Sponsored links