More than likely this is a speed sensor issue or the cluster.
Basically, what is happening is the cluster is getting the signal to move the needle even though the vehicle is not moving.
This is normally always the vehicle speed sensor.
So, we need to check the voltage and see if the speed sensor is sending the signal even though it is not moving.
Here is a guide that will help with this:
https://www.2carpros.com/articles/how-to-check-wiring
Once we know if the sensor is sending the signal, then we will know what direction to take.
Please see the info below and let me know what questions you have.
Thanks
Images (Click to make bigger)
SPONSORED LINKS
Sunday, January 23rd, 2022 AT 2:11 PM