1993 Saturn SL2 Vacuum line connection

Tiny
FORDFALCON54
  • MEMBER
  • 1993 SATURN SL2
  • 4 CYL
  • FWD
  • MANUAL
  • 140,000 MILES
Tried to clean my throttle out and as I was taking it out I accidentally cracked the vacuum line. Anyway I got two out of the three put back together the one I'm stuck on is the solenoid vacuum connection. I don't know where the solenoid is located in my car. I have the basic diagram but it doesn't help me very much so if I could get a better diagram that would be amazing and greatly appreciated and from what I've seen so far I'm suppose to connect it to the top nipple not the bottom one on the solenoid correct?
Thursday, January 30th, 2014 AT 6:01 PM

4 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Its the top and its under the intake manifold if your looking for the canister purge solenoid.
Was this
answer
helpful?
Yes
No
+2
Thursday, January 30th, 2014 AT 6:15 PM
Tiny
MLDANIELS2000
  • MECHANIC
  • 227 POSTS
I can get a vacuum diagram but need an engine size.
Was this
answer
helpful?
Yes
No
Thursday, January 30th, 2014 AT 6:54 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Really dont need a vacuum diagram for that car there isnt many lines and there straight runs. Goes from the throttle body to the canister purge solenoid under the intake manifold. The other line goes from the throttle body to the egr solenoid mounted to the valve cover. Then the from the intake vacuum nipple goes to the pcv in the valve cover.
Was this
answer
helpful?
Yes
No
+1
Thursday, January 30th, 2014 AT 7:39 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Also those cars only have one engine size 1.9L that one is a dual overhead cam. They also made a 1.9L single cam engine same vacuum set up.
Was this
answer
helpful?
Yes
No
+3
Thursday, January 30th, 2014 AT 7:42 PM

Please login or register to post a reply.

Sponsored links