Blower Motor And Fan
REMOVE OR DISCONNECT
Nuts and cross brace bar.
Electrical connector from blower motor.
Cooling tube from blower motor.
Screws attaching blower motor to heater and A/C module assembly.
Blower motor and fan from vehicle.
INSTALL OR CONNECT
Blower motor to heater and A/C module assembly attaching screws, after positioning blower motor.
Tighten screws to 0.6 Nm (5 lb. In.).
Cooling tube to blower motor.
Electrical connector to blower motor.
Cross brace bar and nuts.
Tighten screws to 25 Nm (18 lb. Ft.).
Image (Click to make bigger)
SPONSORED LINKS
Thursday, January 13th, 2011 AT 4:04 AM
