The low beam on the passanger side won't come on?

Tiny
BRTHOMP
  • MEMBER
  • 1993 NISSAN HARDBODY
  • 157,110 MILES
I know that it is a wire but not sure how to fix it what would be the best way? The high beams work fine but the low beam on the passanger side won't come on I know that it is a wire because I talked to the guy I bought it from. I tried to mess with the wires and had it working for a minute but now I can't seem to get it to work now and I want to get it fixed so that I can get the truck inspected so I can be driving it to work. Any help would be appreciated.
Friday, March 30th, 2012 AT 7:39 AM

1 Reply

Tiny
CARADIODOC
  • MECHANIC
  • 33,879 POSTS
Broken wires don't typically work once in a while when you "mess" with it, but what you're describing sounds like how a bad connection in the socket acts. You know the common ground wire is okay because the high beam works. I would grab a test light and check for voltage at the socket. If you find it there right on the terminal, it's not making good contact with the terminal on the bulb. Look for the terminal in the socket to be corroded or spread open. Often you can use a pick to bend it tighter.

If you don't have voltage at the socket, you'll have to follow the wire back to where it's spliced to the wire for the left side. That splice is a good place to find corrosion.
Was this
answer
helpful?
Yes
No
Friday, March 30th, 2012 AT 8:29 AM

Please login or register to post a reply.

Sponsored links