1993 Mazda MX6 timing issue

1993 MAZDA MX6
Avatar
SKATER078
  • MEMBER
  • 1 POST
I changed my timing belt thought it was done right but when cranked it slipped think I kno why it slipped because was not tight enough but b4 I can test that need to no how I can get everything back in time the crank shaft is at tdc but the distributer is pointing at 2 and the cylinder heads are off the marks what can I do
Aug 27, 2013 at 1:20 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
If the crank is at TDC, the distributor should be pointing at the #1 plug wire. As far as the cam, it should be furthest away from opening a valve. Check to see if there are marks for that. I checked our info her and I don't have the diagram for your model year.

Let me know what you fund.
Aug 27, 2013 at 6:54 PM
Advertisement