I am trying to find the spine count for a 1993 lincoln mark vlll rack and pinion
Feb 16, 2015 at 10:03 AM
1993 Lincoln Mark VIII rack and pinion
1993 LINCOLN MARK VIII
DOUGLASW
- MEMBER
- 6 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
you'll have to see if ford will give that info out as we don't have that
Feb 16, 2015 at 12:27 PM
Advertisement
I tried the said they no longer make them and were no help.Thank You
Feb 16, 2015 at 1:05 PM
I looked online see if this right.
Image (Click to enlarge)
Feb 16, 2015 at 3:20 PM
I need the spine count the teeth count on the rack and pinion of the 1993 Lincoln mark vlll need to know we will be putting it on a 1953 mercury steering column and need the teeth count. Thanks for trying.
Feb 16, 2015 at 4:45 PM
I sent the wrong thing. if you are doing that as long as you have a rag joint on both ends should be ok I sent the wrong thing . sorry about that. here is what should have come through
Image (Click to enlarge)
Feb 16, 2015 at 4:50 PM
Do you make an intermediate shaft for the Lincoln mark viii
Feb 16, 2015 at 6:14 PM
Intermediate steering shaft for the lincoln mark viii
Feb 16, 2015 at 6:16 PM
I'm just a mechanic that is what machine shops are for. or go to an auto parts to see if they have one or a junkyard then machine the one from your car's column to accept it. can't be that hard.
Feb 17, 2015 at 5:28 AM
Thank you. For helping.
Feb 17, 2015 at 7:01 AM