You have auto temp control do this first to see if any codes a sensor may be causing the problem
While pressing and holding temperature control knob and left side of fan (down) button, turn ignition on. Indicators will flash and tone will sound as a check. Press OFF button to cancel indicator check. After indicator check is complete, system will enter self-diagnostic mode. Stored trouble codes will appear in sequence on temperature display panel. See AUTOMATIC A/C-HEATER SYSTEM TROUBLE CODES table.
Press left side of MODE button to display codes one at a time. If tone sounds when code is displayed, problem causing code currently exists. If tone does not sound when code is displayed, associated problem is past history and does not currently exist. Press OFF button to exit self-diagnostics
SPONSORED LINKS
Friday, February 7th, 2014 AT 7:03 AM