No electrical power at fuse panel

1993 GMC SIERRA
11,300 MILES
Avatar
GTOBILL53
  • MEMBER
  • 1 POST
Just finished replacing brake lines, all brakes and fuel lines except 1/4" vapor line. Put 5 gallons of premium gas and installed new Interstate battery. The 4.3 L turns over well, but only has power at the starter and electric internal fuel pump. No power at dash, horn,radio, lights and suspect no power at the coil.
It's a plain truck 4.3 L, auto trans, power steering & regular cab, 2 wheel drive with 8 ft box, no other accessories.
The truck sat for 3 years prior to the current work, I've had the truck since new.
Can you point me in the right direction?
May 29, 2012 at 5:56 PM
Advertisement
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
If there's a smaller positive battery cable bolted to the under-hood fuse box, check the connections to be sure they're clean and tight. Work your way along that wire with a test light to see where voltage is lost. Do that with the head light switch turned on so current is attempting to flow. That will make the bad connection show up.

Check for voltage on the fuses under the hood. If it is missing on some fuses that should always have it, you might suspect a corroded rivet on the brass strips under the box. Also look for a wire corroded off under the fuse box.
May 29, 2012 at 6:35 PM
Avatar
KHLOW2008
  • ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
Have you check all the fuses and fusible links?
May 29, 2012 at 6:36 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.