How to install a starter in my car ? Thank you! Claudia
Dec 13, 2012 at 11:15 PM
1993 Geo Storm Install Starter Car Thank You Claudia
1993 GEO STORM
ANONYMOUS
- MEMBER
- 1 POST
Advertisement
ASEMASTER6371
- ✓ASE Certified Mechanic
- 52,796 POSTS
Disconnect battery ground cable, then battery positive cable from starter.
On models with manual transaxle, disconnect ignition switch lead from starter solenoid.
On models with automatic transaxle, disconnect ignition switch lead from starter solenoid pigtail.
On all models, remove two starter motor mounting bolts, then the motor.
Reverse procedure to install, torque starter attaching bolts to 29 ft. lbs. and battery positive cable nut to 26 ft. lbs.
This guide will help walk you through the steps
https://www.2carpros.com/articles/how-to-replace-a-starter-motor
Please run down this guide and report back.
On models with manual transaxle, disconnect ignition switch lead from starter solenoid.
On models with automatic transaxle, disconnect ignition switch lead from starter solenoid pigtail.
On all models, remove two starter motor mounting bolts, then the motor.
Reverse procedure to install, torque starter attaching bolts to 29 ft. lbs. and battery positive cable nut to 26 ft. lbs.
This guide will help walk you through the steps
https://www.2carpros.com/articles/how-to-replace-a-starter-motor
Please run down this guide and report back.
Dec 14, 2012 at 3:31 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.