Tuesday, November 1st, 2011 AT 6:52 PM
ESSEGUY
- MEMBER
- 1993 FORD FESTIVA
- 126,000 MILES
My old cluth cable broke
How do you remove a clutch cable
1 Reply
HMAC300
- MECHANIC
- 48,601 POSTS
CLUTCH� CABLE
Removal� &� Installation
1. Disconnect� clutch� cable� from� release� lever.� Remove� nuts� retaining� clutch� cable� at� firewall.� Unhook� clutch� cable� at� clutch� pedal.
2. Remove� clutch� cable� from� engine� compartment� side.� To� install, � apply� lithium� grease� to� pedal� cable� hook� and� joint� between� release� lever� and� pin.� Reverse� removal� procedure� to� complete� installation.� See Fig.� 2�.
Pic enclosed
Removal� &� Installation
1. Disconnect� clutch� cable� from� release� lever.� Remove� nuts� retaining� clutch� cable� at� firewall.� Unhook� clutch� cable� at� clutch� pedal.
2. Remove� clutch� cable� from� engine� compartment� side.� To� install, � apply� lithium� grease� to� pedal� cable� hook� and� joint� between� release� lever� and� pin.� Reverse� removal� procedure� to� complete� installation.� See Fig.� 2�.
Pic enclosed
Image (Click to make bigger)
Was this helpful?
Yes
No
Tuesday, November 1st, 2011 AT 7:06 PM
