1993 FORD EXPLORER
170,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
Truck starts and runs fine with normal idle, but once engine is warm has a "chugg chugg" when the gas is applied and if i push it down all the way it seems to stall, gets quiet like the engine is dead but it is still running. Changed wires, plugs, air filter, inspected and cleaned the MAF, IAC, trottle/air intake plate,(there was a small hole in the plastic intake tube between the MAF and the Throttle, taped to fix it), new cat converter, O2 sensor, serpintine belt, selenoid, and a number of other small things... I cant seem to figure out the cause of the chugging. Tried fuel injector cleaner(use 1 about every 2000mi), checked repeatedly for vacuum leaks,tried valve seals and gasket seals (had some white smoke coming from exhaust on startup but now since has gone)(also somtimes the exhaust smells like rotten eggs when it starts to chugg out)and just about everthing i could think of. My oil has a greenish look(i added engine restore and a bit of lucas stabilizer) but no sign of water or antifreeze, my antifreeze has no sign of oil either. PLEASE HELP me figure this out, i really need my truck as its paid for and would like to fix it, but being on a fixed income money is hard to come by, which is why i have'nt taken her to the shop yet. Thank you so much!!!
Oct 26, 2012 at 4:32 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
scan for codes and check fuelpressure first.
Oct 26, 2012 at 5:51 PM
Advertisement
Avatar
BIGDADDY999
  • MEMBER
  • 5 POSTS
what do the abreviations mean in your diagram
Oct 28, 2012 at 2:14 AM