My car is not giving spark I replaced the ignition coil, spark plugs and spark plug cable, but still there's no spark what could be the problem?
Mar 18, 2015 at 12:11 PM
no spark
1993 FIAT UNO
VAN WYKIE
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Hello,
It sounds like the crankshaft angle sensor is out and not working Here is a guide that will give you an idea of what you are in for when doing the job.
https://www.2carpros.com/articles/crankshaft-angle-sensor-replacement
Your will be in a different location either near the bellhousing or at the front of the crankshaft.
Here is a full guide
https://www.2carpros.com/articles/car-cranks-but-wont-start
Please let us know if you need anything else to get the problem fixed.
Cheers, Ken
It sounds like the crankshaft angle sensor is out and not working Here is a guide that will give you an idea of what you are in for when doing the job.
https://www.2carpros.com/articles/crankshaft-angle-sensor-replacement
Your will be in a different location either near the bellhousing or at the front of the crankshaft.
Here is a full guide
https://www.2carpros.com/articles/car-cranks-but-wont-start
Please let us know if you need anything else to get the problem fixed.
Cheers, Ken
Jan 7, 2018 at 7:57 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.