SPONSORED LINKS

If so how can I tell if power is going to the.

Tiny
JAY103
  • MEMBER
  • 1993 DODGE SHADOW
  • 148,231 MILES
If so how can I tell if power is going to the starter I really think its is the starter but im not for sure.(What signs to look for) do I need two people for this?
Wednesday, February 13th, 2013 AT 3:01 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,700 POSTS
Have a helper turn the key to the start position while you check for power to the smaller wire on the starter. You should get 12v. If you are getting power. Chances are the starter is bad. If there is no power, check to see if there is power at the relay. Remove it and check with a volt meter or a test light.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, February 13th, 2013 AT 3:12 AM

Please login or register to post a reply.

Related Starter Content

Starter and Set Points Gap!
VIDEO
Starter and Set Points Gap!
Instructional repair video
Starter
GUIDE
Starter
An engine starter is constructed as a high torque, high amperage 12 volt motor fitted with an electrical solenoid and Bendix gear which is used to rotate an engine between...

Sponsored links