how to replace thermostat
Feb 7, 2011 at 4:56 PM
Fix car
JAVIERN
- MEMBER
- 1 POST
Advertisement
REMOVAL
1. Disconnect negative battery cable.
2. Drain coolant and remove air cleaner assembly.
3. Remove coolant outlet to inlet manifold attaching bolt and nut.
4. Remove coolant outlet and thermostat.
INSTALLATION
1. Install thermostat in inlet manifold.
2. Install coolant outlet to inlet manifold.
3. Install attaching bolt and nut sealer and torque to 25 Nm (18 lb. ft.).
4. Install air cleaner assembly.
5. Refill coolant. Refer to Draining and Refilling.
6. Connect negative battery cable and torque bolt to 15 Nm ( 11 ft.lb. ). Refer to Idle Learn Procedure.
7. Inspect for leaks.
1. Disconnect negative battery cable.
2. Drain coolant and remove air cleaner assembly.
3. Remove coolant outlet to inlet manifold attaching bolt and nut.
4. Remove coolant outlet and thermostat.
INSTALLATION
1. Install thermostat in inlet manifold.
2. Install coolant outlet to inlet manifold.
3. Install attaching bolt and nut sealer and torque to 25 Nm (18 lb. ft.).
4. Install air cleaner assembly.
5. Refill coolant. Refer to Draining and Refilling.
6. Connect negative battery cable and torque bolt to 15 Nm ( 11 ft.lb. ). Refer to Idle Learn Procedure.
7. Inspect for leaks.
Feb 7, 2011 at 5:23 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.