o2 sensor

150,000 MILES • V8 • FWD • AUTOMATIC
Avatar
DOWNWIND
  • MEMBER
  • 4 POSTS
How does one break the o2 sensor loose?
May 11, 2011 at 8:16 PM
Advertisement
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,414 POSTS
If it's rusted tight, a REAL good product is Mopar Rust Penetrant from the Chrysler dealer's parts department, but once the parts are separated you must wash the product off, otherwise it opens the way for moisture to enter the threads and make things tighter next time.

O2 sensors often come free easier when the exhaust manifold is still warm. If you know for a fact the old one is defective, cut the wires off so you can use a six-point deep socket with a long breaker bar. Wrenches and 12-point sockets tend to round the hex on the sensor.
May 11, 2011 at 8:58 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle