1992 Toyota MR2 power steering failure

1992 TOYOTA MR2
130,000 MILES
Avatar
JOYCE HOUSER
  • MEMBER
  • 1 POST
power steering went out and PS light came on. Fluid was empty so we added power steering fluid - didn't make a difference. There isn't any fluid visibly leaking out. Looks like the power steering has its own pump - what would be the next step in troubleshooting this issue?
Jul 16, 2013 at 7:55 PM
Advertisement
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
When the power steering fluid disappears with no visible leaks, suspect the rack and pinion assembly. The fluid will leak into one of the bellows boots around an inner tie rod end, then it will run into the other boot through the transfer tube. Remove either small clamp from one of the boots, then use a pick or small flat blade screwdriver to pull it open a little. If power steering fluid comes running out, replace the rack.
Jul 16, 2013 at 9:28 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.