SPONSORED LINKS

Throws luke warm air at idle, will only throw.

Tiny
OUTLANDER69
  • MEMBER
  • 1992 PLYMOUTH ACCLAIM
  • 96,642 MILES
Throws luke warm air at idle, will only throw hot air if you rev it up, I flushed rad and heatercore replaced thermostat still the same
Friday, December 14th, 2012 AT 2:39 AM

4 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Are both heater core hoses getting hot? Is the coolant full and free of air blocks?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, December 14th, 2012 AT 2:42 AM
Tiny
OUTLANDER69
  • MEMBER
  • 3 POSTS
Yes and yes
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2012 AT 12:42 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
If both hoses are getting hot, then you have a problem with the blend air door. Check that.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2012 AT 12:59 AM
Tiny
OUTLANDER69
  • MEMBER
  • 3 POSTS
Replaced 16# rad cap with a 7# cap and got alot more heat.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2012 AT 2:26 AM

Please login or register to post a reply.

Related Heater Not Working Content

Heater Not Working
VIDEO
Heater Not Working
Instructional repair video
Heater Not Working
GUIDE
Heater Not Working
Step 1 - A heater cannot operate unless the engine is full of coolant/antifreeze. If coolant level is low check the system for leaks.
VIEW MORE

Sponsored links