1992 Mercury Topaz brakes

1992 MERCURY TOPAZ
118,000 MILES • 2.3L • 4 CYL • FWD • AUTOMATIC
Avatar
UNHOLYONE
  • MEMBER
  • 1 POST
ok so i bought a 92 topaz and its has brakes on the pass side but the drivers side isnt gettin fluid i have replaces the lil rubber line and the caliper and im not getting fluid much fluid still
Mar 8, 2014 at 11:16 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
checkfor a plugged line by removeing one that isn't getting fluid. then check your master for pressure it may be an abs unit as well if you have that.
Mar 9, 2014 at 8:56 AM
Advertisement
Avatar
STRIPPEDKNUCKLES
  • MEMBER
  • 2 POSTS
Where you able to figure out the brake issue? I have the same problem with a 92 topaz. Fluid on the passenger side with nothing on the driver side? All lines are clear.
Nov 2, 2014 at 5:15 PM