SPONSORED LINKS

Hellllllllllllllp

Tiny
THALMUS
  • MEMBER
  • 1992 JEEP WRANGLER
  • 6 CYL
  • FWD
  • MANUAL
Ok I have an 1992 jeep wrangler it started once while I tested the crankshaft senor wires but and then I tired to crank it the next day and it wouldnt start and now it starts sometimes and sometimes it dont now it just cranks and wont start and it start up every once in
SPONSORED LINKS
Wednesday, March 23rd, 2011 AT 5:18 PM

3 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
SO do you have spark?What led you to the crank shaft sensor wire's?
Was this
answer
helpful?
Yes
No
Wednesday, March 23rd, 2011 AT 5:19 PM
Tiny
THALMUS
  • MEMBER
  • 9 POSTS
Nope no spark. After doing some research on line it told me to test the sensor wires
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, March 23rd, 2011 AT 5:27 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Let's test the sensor if you have a multimeter?I posted a diagram of the connector terminals here is how you test it. Let me know what you find.

PROCEDURE

1. Near the rear of intake manifold, disconnect (CPS) pigtail harness connector from main wiring harness.
2. Place an ohmmeter across terminals A and B. The meter reading should be open (no resistance). Replace sensor if any resistance is indicated.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Wednesday, March 23rd, 2011 AT 9:49 PM

Please login or register to post a reply.

Related Crankshaft Sensor Test Content

VIEW MORE

Sponsored links