1992 Jeep Cherokee Transmission issues

SETHWILSON55

MEMBER
1992 JEEP CHEROKEE
4.0L
6 CYL
2WD
MANUAL
125,000 MILES

I've got a 1992 Cherokee 2wd with a manual transmission. The internal slave cylinder went out and I replaced it. However, now 1st and 2nd only grind and go nowhere. The other gears seem to work. Where did I mess up?

Thursday, August 13th, 2015 AT 7:26 PM

9 Replies

WRENCHTECH

MECHANIC
20,761 POSTS

Sounds like you still have air in the system. They are very hard to bleed because the bleeder is at the bottom and the air rises to the top.

SPONSORED LINKS

Was this

answer

helpful?

Yes

Friday, August 14th, 2015 AT 5:59 AM

SETHWILSON55

MEMBER
6 POSTS

I'll try bleeding it again and let you know. Thanks!

Was this

answer

helpful?

Yes

Friday, August 14th, 2015 AT 6:28 AM

SETHWILSON55

MEMBER
6 POSTS

I've bled and bled and bled, and its still the exact same. It will shift into 1st and 2nd but when I let off the clutch it makes a horibble grinding noise. 3rd, 4th, 5th and reverse work fine. Any help is greatly appreciated!

Was this

answer

helpful?

Yes

Friday, August 14th, 2015 AT 7:37 PM

SETHWILSON55

MEMBER
6 POSTS

Oh and it is a bit difficult to get it into 1st.

Was this

answer

helpful?

Yes

Friday, August 14th, 2015 AT 7:41 PM

WRENCHTECH

MECHANIC
20,761 POSTS

Those symptoms are different from what I thought you were experiencing. I thought it was grinding wen you tried to shift it not when you let the clutch out.

This sounds like something is wrong in the transmission, possibly with the gear selector.

SPONSORED LINKS

Was this

answer

helpful?

Yes

Friday, August 14th, 2015 AT 8:22 PM

SETHWILSON55

MEMBER
6 POSTS

Sorry I didn't explain it correctly to begin with. I'm not much of a mechanic lol. Is that something I could have shifted or messed up when I pulled and replaced the tranny?

Was this

answer

helpful?

Yes

Friday, August 14th, 2015 AT 8:44 PM

WRENCHTECH