No pulse fuel injector

1992 ISUZU RODEO
Avatar
MHOMESLEY12
  • MEMBER
  • 1 POST
i have a 92 isuzu rodeo 3.1l v6 4x4, cannot get fuel out of the injectors, it has brand new fuel pump and filter, no pulse at the injectors. i replaced whole distributor because i thought it might the position sensor but it still has no pulse? what should i do next?
Oct 16, 2013 at 1:55 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
It sounds like the ECM is out or not getting power or ground. Here is a guide and some diagrams (below) that will help us see whats going on.

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

and

https://www.2carpros.com/articles/how-to-use-a-test-light-circuit-tester

If everything checks out get a used ECM and plug it in.

Please let us know what happens.

Cheers, Ken
Image (Click to enlarge)
Attached Media
Sep 12, 2017 at 5:04 PM
Advertisement