wont shift to 2nd locks down trans/rear end what could be wrong?

1992 FORD CROWN VICTORIA
90,000 MILES
Avatar
GRAHAMNORRIS
  • MEMBER
  • 6 POSTS
AOD Transmission when time to shift to 2nd gear at roughly 30mph locks rear end believe transmission or torque converter possibly. lifted car off ground and tried when hitting 2nd gear second point locked up passenger rear pulling wheel and driver rear kept rolling. What could make it do this help. with it on the stands should i be able to turn the wheels with the car in park. the driveshaft does not turn but the wheels do the pulling wheel goes forwards and the driver wheel spins backwards at same time by locks with it on stands soon as it gets almost 30mph the driveshaft stops sudden and the pulling wheel locks in place like e brake and the driver rear keeps spinning until it stops on its on
Is this the sytmptom of broken band, gear or what in a transmission thanks. Always ran fine til one day locked up going in gear towed home.
Jan 8, 2012 at 10:03 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
yu have an application of two different clutches going on when they aren'st supposed to or there is something broken in trans. seea trans guy near you.
Jan 9, 2012 at 12:07 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.