used wrong low side port while trying to recharge

1992 FORD CROWN VICTORIA
120,000 MILES
Avatar
JAMES_24
  • MEMBER
  • 1 POST
AC compressor was turning on and of so i tried to recharged it but i used the wrong low side port and let some air what could be the problem. the ac compressor and let some air out now it's not turning anymore.
Jul 2, 2012 at 1:56 PM
Advertisement
Avatar
IMPALASS
  • ASE Certified Mechanic
  • 3,112 POSTS
  • ASE Certified Mechanic
Check fuse #6 and #17
You may have damaged the compressor. Best thing to do is start all over. AutoZone has a vacuum pump you can purchase/take back under the tool program. I would draw a vacuum and see if it holds. Then start your normal servicing. Remember until it gets some Freon in the system it will not turn. So draw the vacuum and let it sit……if it holds then open the low side and start the servicing and after a little it may come back on. If not you may need to take it and have someone check it for you.

Jul 2, 2012 at 3:26 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.