Turns over, but won't run. Checked the inertia switch and its fine
Mar 4, 2014 at 1:52 AM
1992 Ford Aerostar Won't start
BRAGGTYLER72
- MEMBER
- 1 POST
Advertisement
Hello,
Ok what exactly have you checked out...
Do you have good spark at the plugs? Bright Bluish/White = Good Orange = Not Good
If No Spark at all then would take Distributor Cap Off turn engine over to make sure Distributor Rotor Spins. I spins and no spark replace the Ignition Control Module it should be on the Front Right Inner Fender in Engine Compartment behind Air Filter Box. There will be Aluminum Fins surrounding it and you will need a special tool to get to the Bolts.
Ok what exactly have you checked out...
Do you have good spark at the plugs? Bright Bluish/White = Good Orange = Not Good
If No Spark at all then would take Distributor Cap Off turn engine over to make sure Distributor Rotor Spins. I spins and no spark replace the Ignition Control Module it should be on the Front Right Inner Fender in Engine Compartment behind Air Filter Box. There will be Aluminum Fins surrounding it and you will need a special tool to get to the Bolts.
Mar 8, 2014 at 12:02 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.