Misses real bad in high gear I changed dist

Tiny
CHEVYTRUCK92
  • MEMBER
  • 1992 CHEVROLET SILVERADO
  • 247,000 MILES
Misses real bad in high gear I changed dist. Cap plugwires and plugs still misses you can pull any plug wire off at idle and it dont change idle
Saturday, November 10th, 2012 AT 1:22 PM

3 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Any applicable trouble codes? You can check those, yourself. What's the engine size? A high speed cut-out could be caused by faulty ignition coil? As far as your other issue, I'd want to look at it. Usually if no reaction when you kill cylinder, that cylinder is dead.
Was this
answer
helpful?
Yes
No
Saturday, November 10th, 2012 AT 6:17 PM
Tiny
CHEVYTRUCK92
  • MEMBER
  • 2 POSTS
It is a 350 motor I checked for vaccume leaks their was none I checked compression all cyclinders are at about 175 accept number 4 it has 0 what does that mean what should I do next.
Was this
answer
helpful?
Yes
No
Saturday, November 10th, 2012 AT 7:55 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Maybe a bad valve on number 4?
Was this
answer
helpful?
Yes
No
Sunday, November 11th, 2012 AT 4:20 PM

Please login or register to post a reply.

Sponsored links