steering wheel removal

1992 CHEVROLET CAPRICE
Avatar
BIGJACKSR
  • MEMBER
  • 1 POST
removing steering wheel from 92 capric classic
Nov 25, 2010 at 9:57 PM
Advertisement
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Removal

Deactivate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG DEACTIVATION.
Remove inflator module as previously described.
Remove two screws securing steering pad, then remove pad if equipped.
Disconnect electrical connectors and leads.
Remove retainer and nut, then, using suitable steering wheel puller tool.
Installation


Align mark on steering wheel with mark on shaft, then install nut. Torque to 25-30 ft. lbs.
Install retainer, then the steering wheel module.
Connect horn lead and install pad if equipped, securing with two attaching screws.
Following installation, activate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG ACTIVATION.
Turn ignition switch to the On position and verify the ``Inflatable Restraint'' indicator flashes 7 to 9 times then turns Off. If indicator does not respond, refer to DIAGNOSIS AND TESTING PROCEDURE/TESTING PROCEDURES/RETRIEVING TROUBLE CODES.

Nov 25, 2010 at 10:03 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.