Engine won't rotate using key but will with underhood starter switch. Why?
Friday, April 29th, 2011 AT 1:05 AM
3 Replies
HMAC300
MECHANIC
48,601 POSTS
Check your starting system. It can be a relay, or blown fuse or a nuetral safety switch.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, April 30th, 2011 AT 10:39 PM
GMAN57
MEMBER
4 POSTS
Thanks for your reply. Right now I am removeing the parts needed to expose the starter enable relay, starter switch, and most likely the ignition switch. I tested the current going to the crank fuse. Nothing there when key in start position. Whats your advice?
Was this
answer
helpful?
Yes
No
-1
Wednesday, May 4th, 2011 AT 12:41 AM
HMAC300
MECHANIC
48,601 POSTS
Check to make sure that any fusible links aren't burnt up. They usually connect to the starter and are smaller wires connected to larger ones. That sounds like your problem especially if your lights work but nothing will start.