SPONSORED LINKS

1991 Toyota Camry front seal

Tiny
TONY BALOWKNEE
  • MEMBER
  • 1991 TOYOTA CAMRY
  • 4 CYL
  • FWD
  • AUTOMATIC
What do I need to do to remove and replace the front oil seal on a 4 cylinder 1991 toyota camry?
Thursday, March 3rd, 2011 AT 12:24 AM

2 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
You need a repair manual, damper puller and torque wrench

CRANKSHAFT FRONT SEAL

Removal & Installation
Remove timing belt and crankshaft sprocket. See TIMING BELT under REMOVAL & INSTALLATION. Using a knife, cut off oil seal lip. Pry seal from oil pump housing, using care not to damage sealing surfaces.
To install, apply grease to lip of new seal. Using hammer and Seal Installer (SST 09226-10010), install seal until seal surface is even with oil pump housing. To install remaining components, reverse removal procedure.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, March 3rd, 2011 AT 12:41 AM
Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Just a side note
make sure its the front seal that is leaking and not the oil pump seal and gasket
oil pump seal and gasket is very common
Was this
answer
helpful?
Yes
No
+1
Thursday, March 3rd, 2011 AT 1:01 AM

Please login or register to post a reply.

Related Oil Change Content

Oil Change & Filter Replacement Toyota
VIDEO
Oil Change & Filter Replacement Toyota
Instructional repair video
New Car Service
GUIDE
New Car Service
When you buy a new car the most important thing you can do is keep the services up and give your car a visual inspection both under the hood and under the car. Although the...
VIEW MORE

Sponsored links