how do you remove transfer case
Dec 15, 2012 at 12:32 AM
1991 NISSAN PATHFINDER
LARRY HOLLEMAN
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
REMOVAL & INSTALLATION
TRANSFER CASE
Removal
Drain oil from transfer case and transmission. Mark drive shafts for index reference during installation. Remove front and rear drive shafts. Remove torsion bar spring. Remove 2nd crossmember. Remove transfer control lever from transfer outer shift lever. Separate transfer case from transmission. Remove transfer case from vehicle.
Installation
To install transfer case, reverse removal procedure. On manual transmission models, apply sealant to transfer case-to-transmission mating surface.
TRANSFER CASE
Removal
Drain oil from transfer case and transmission. Mark drive shafts for index reference during installation. Remove front and rear drive shafts. Remove torsion bar spring. Remove 2nd crossmember. Remove transfer control lever from transfer outer shift lever. Separate transfer case from transmission. Remove transfer case from vehicle.
Installation
To install transfer case, reverse removal procedure. On manual transmission models, apply sealant to transfer case-to-transmission mating surface.
Dec 15, 2012 at 1:39 AM
Advertisement