SPONSORED LINKS

1991 Mazda B2600 How to remove codes

Tiny
CAMS AUTO
  • MEMBER
  • 1991 MAZDA B2600
  • 175,554 MILES
I have made repairs to a 1991 Mazda B2600i. It is a 5 speed the motor is a 159. The date of manufacturing is October 1991. I do not have a scanner to use to remove the codes found before repairs were made.
Monday, January 27th, 2014 AT 10:40 AM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Have you tried disconnecting the battery for about 10 minutes?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, January 27th, 2014 AT 10:54 AM
Tiny
CAMS AUTO
  • MEMBER
  • 3 POSTS
Sorry. I asked the wrong question apparently. My supervisor just informed me that he wants to know how to find out what the codes ARE without using a scanner. I think that makes more sense.
Was this
answer
helpful?
Yes
No
Monday, January 27th, 2014 AT 11:02 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
You need a scanner to read the codes to the best of my knowledge. To delete codes, do the following:
Disconnect battery ground cable for a minimum of 10 seconds to clear trouble code stored in the memory.

With Fuel Injected Models With OBD1

Disconnect battery ground cable for a minimum of 10 seconds, then depress brake pedal five times to clear trouble code’s stored in the memory.
Was this
answer
helpful?
Yes
No
+1
Wednesday, January 29th, 2014 AT 8:25 AM

Please login or register to post a reply.

Related Check Engine Light Content

Sponsored links