I decided to swap the main relay and after I did it, it quit cranking?

1991 HONDA ACCORD
186,000 MILES • 2.2L • 4 CYL • 2WD • MANUAL
Avatar
DANTHEMAN888
  • MEMBER
  • 2 POSTS
Hi, i have the car listed above that I purchased for $850.00. It needed a new fuel pump but it would crank just have to give it a jump and if you would put starter fluid it would start up then shut off due to the fuel pump. so, i decided to swap the main relay and after i did it, it quit cranking, but the starter relay clicks when i try now. Now i am stuck. Help me please!
Oct 10, 2022 at 11:39 AM
Advertisement
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,840 POSTS
  • ASE Certified Mechanic
It sounds like the starter motor has gone out. To be sure you need to check for power at the trigger wire on the starter.

This guide will show you how:

https://www.2carpros.com/articles/starter-not-working-repair

Here is how you can change the starter out below:

1. Disconnect battery ground cable.
2. Disconnect all electrical leads at the starter.
3. Loosen starter mounting bolts, then remove starter.
4. Reverse procedure to install.

This guide can help walk you through the repair:

https://www.2carpros.com/articles/how-to-replace-a-starter-motor

Alsom here are the starter wiring diagrams so you can see how the system works. Please go over these guides and report back.






Oct 10, 2022 at 4:14 PM
Avatar
DANTHEMAN888
  • MEMBER
  • 2 POSTS
turns out it was a fuse. thank you
Oct 18, 2022 at 9:09 AM
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,840 POSTS
  • ASE Certified Mechanic
Nice work, we are here to help, please use 2CarPros anytime.
Oct 19, 2022 at 11:43 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.